BKDDZ - CUSTOM PLASMA STANDARD PLZN1-3X
- MSDS: BKDDZ
- Manufacturer: SPEX INDUSTRIES INC
- Product Name: CUSTOM PLASMA STANDARD PLZN1-3X
- National Stock Number: 6850-00F015411
Product Identification
Product ID:CUSTOM PLASMA STANDARD PLZN1-3X
MSDS Date:04/12/1989
FSC:6850
NIIN:00F015411
MSDS Number: BKDDZ
Responsible Party
EDISON, NJ 08820
Emergency Phone: (201) 549-7144
Info Phone: (201) 549-7144
Preparer: LINDA OLCKVARY
Cage: 07987
Contractor
Telephone: (201) 549-7144
Cage: 07987
Ingredients
HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)
CAS: 7647-01-0
RTECS: MW4025000
Fraction By Weight: 2-5%
OSHA PEL C 5 PPM
ACGIH TLV: C 5 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ZINC (SARA III)
CAS: 7440-66-6
RTECS: ZG8600000
Fraction By Weight: 0.1-1%
OSHA PEL 10 MG ZNO/M3
ACGIH TLV: 10 MG ZNO/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: BURNS/PERMANENT VISUAL
IMPAIRMENT/TOTAL LOSS OF VISION. SKIN:
REDNESS/PAIN/BURNS/IRRITATION/DERMATITIS. INGESTION: HARMFUL/BURNS
OF THE MUCOUS MEMBRANES OF THE MOUTH/ESOPHAGUS/STOMACH/PAIN/NAUSE
A/VOMITING. INHALATION: FATAL CAUSING SPASM/IRRITATION OF THE UPPER
RESPIRATORY TRACT/INFLAMMATION/EDEMA OF THE LARYNX.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: BRONCHI, CHEMICAL PNEUMONITIS,
COUGHING, BURNING OF THE THROAT, INFLAMMATION OF THE NOSE & CHOKING
SENSATION, PULMONARY EDEMA.
First Aid
First Aid:EYES/SKIN: FLUSH W/WATER FOR AT LEAST 15 MINS. INHALATION:
MOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:USE MEDIA APPROPRIATE TO SURROUNDING FIRE
CONDITIONS
Unusual Fire/Explosion Hazard:CORROSIVE LIQUID. ELEVATED TEMPS MAY
CAUSE CONTAINERS TO BURST.
Accidental Release
Spill Release Procedures:VENTILATE AREA. DILUTE SPILL W/WATER &
NEUTRALIZE W/SODA ASH, LIMESTONE ETC. WIPE UP & PUT INTO A SEALED
CONTAINER FOR PROPER DISPOSAL. WASH SPILL SITE OFF W/WATER AFTER
MATERIAL PICK-UP IS COMPLETE.
Neutralizing Agent:SODA ASH, LIMESTONE
Handling
Handling and Storage Precautions:HYDROCHLORIC ACID WILL ATTACH MOST
METALS/SOME FORMS OF PLASTICS, RUBBER, & COATINGS. STORE AT ROOM
TEMPERATURE.
Other Precautions:KEEP TIGHTLY SEALED WHEN NOT IN USE. AVOID
INHALATION, INGESTION, CONTACT W/EYES & SKIN.
Exposure Controls
Respiratory Protection:WEAR MSHA/NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST: USE ONLY IN A CHEMICAL FUME HOOD
Eye Protection:GOGGLES
Other Protective Equipment:LAB COAT
Work Hygienic Practices:REMOVE/WASH CONTAMINATED CLOTHING BEFORE REUSE.
WASH CAREFULLY AFTER USE.
Supplemental Safety and Health
Chemical Properties
Spec Gravity: 1
Solubility in Water:SOLUBLE
Appearance and Odor:TRANSPARENT SOLUTION W/AN ACRID ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
BASES, AMINES, ALKALI METALS, COPPER, COPPER ALLOYS, ALUMINUM/HYDROGEN
CHLORIDE CORRODES STEEL.
Hazardous Decomposition Products:TOXIC FUMES OF HYDROGEN CHLORIDE GAS
Disposal
Waste Disposal Methods:CONTACT LOCAL HAZARDOUS OR CHEMICAL WASTE
DISPOSAL AGENCY FOR REGULATIONS. CORROSIVE LIQUID.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.